Hands on with the Moft Snap System for iPad | AppleInsider

2022-08-31 08:49:28 By : Ms. Bella Bai

Copyright © 2022, Quiller Media, Inc.

AppleInsider is supported by its audience and may earn commission as an Amazon Associate and affiliate partner on qualifying purchases. These affiliate partnerships do not influence our editorial content.

The Snap Case for iPad by Moft gives users access to a magnetic accessory ecosystem that doesn't inhibit the iPad's existing functionality.

The iPad Pro and iPad Air are thin and light tablets that use magnets to attach accessories like the Apple Pencil and Magic Keyboard. However, the magnet placement on the iPads isn't ideal for every type of accessory.

Moft created the Snap System to enhance the existing magnetic functionality of the iPad. Using a slim-fit case or magnetic sticker, iPad owners can take advantage of Moft's three magnetic stand types.

Since the magnets in the rear of the iPad are placed around the edges of the device casing, accessories would need to fit the entire width of an iPad for secure fastening. Moft gets around this by having a set of strong magnets situated in the center of the iPad.

Thanks to those centered magnets, Moft's accessories can be much more compact and only need to be large enough to cover those magnets. This gives users the opportunity to have a variety of smaller stands that can be easily stowed when not in use.

The Moft Snap Case for iPads fits the 11-inch iPad Pro, 12.9-inch iPad Pro, and the iPad Air 4 and newer. It securely attaches using the iPad's internal magnets without needing a lip around the front of the device.

The key component of the Moft Snap Case is the passthrough Smart Connector. This allows the case to remain attached to the iPad while connecting it to a Smart Keyboard Folio or Magic Keyboard.

The case's outer shell is plastic, while the back portion is made from vegan leather. The top of the case has a hollow portion for keeping the Apple Pencil in place while it is attached to the iPad.

The overall design is simple and doesn't get in the way of using the iPad normally. The leather makes the case feel grippy, but the case is thin enough to allow closing it in the Magic Keyboard.

When the Snap Case is attached to the iPad, it enables users to attach Moft's other magnetic accessories that are part of the Snap System. These include the Snap Tablet Stand, Snap Float Stand, and Wall Stand.

The Moft Snap Case lives up to its promise as a thin iPad case that stays out of the way. It attaches to the various Moft magnetic stands and the Magic Keyboard without any problem.

The leather is comfortable to hold and makes the entire case feel more premium. However, the side of the case that covers the buttons and Apple Pencil is suboptimal.

The volume buttons are hidden behind a sloped piece of plastic that surrounds the Apple Pencil holder. The buttons are hard to reach and incredibly difficult to press.

Even the power button is difficult to press because it sits within a recessed cavity. We wouldn't recommend using any of these buttons while the iPad is attached to the Moft accessories, especially the Wall Stand, because the force needed to press the buttons will send the iPad flying.

The Apple Pencil cover is also a problematic choice. Apple's magnetic attach and charging system for the Apple Pencil is amazing because of its ease of access. Adding a plastic guard around it may keep the Pencil from breaking free in a bag, but it makes getting the Pencil in and out annoying.

Users have to reach behind the case and push the pencil out of the holder. If the case is situated where the hole is obscured in any way, users will have to move the entire iPad out of the way to get the Apple Pencil free.

These are minor complaints overall. The case itself is nice enough to use and has mostly faded into the background of our daily iPad use.

Owners of iPads that are not compatible with the Moft Snap Case can still use the Moft Snap System thanks to the Moft Snap Tablet Sticker. Note that this is not a reusable pad, but it is a relatively cheap option to get access to the Moft accessories.

Instead of using an entire case, the Snap Tablet Sticker attaches to the rear of the iPad or case to enable access to the Snap System. The sticker must be placed on the outermost layer for the magnets to work. Placing the sticker behind a case, even a slim one, won't work.

The best use case for the Snap Tablet Sticker is for households with multiple iPad users. Buying multiple cases may be too expensive, but getting a few stickers will enable everyone to access the Snap System stands.

The Snap Tablet Stand and Snap Float Stand come bundled with one Snap Tablet Sticker.

Buy additional Moft Snap Tablet Sticker for $9.99 on the Moft website.

The Moft Snap Tablet Stand is an ultra-thin magnetic stand that folds flat when not in use. It can easily stay attached to the back of an iPad without adding noticeable thickness or be stored easily when not in use.

The stand folds open and can be rotated into portrait or landscape orientations for multiple use angles. Lay the iPad on the stand in landscape to draw or view media, or turn the iPad and stand to portrait for video calls easily.

When combined with the Moft Snap Case, it sits perfectly centered on the rear of an iPad. The magnets are strong enough to keep the iPad balanced when in use but are not strong enough to hold the tablet's weight on its own.

There is only an open or closed position for the Snap Tablet Stand. Magnets align the parts to lock it into one of the two modes.

As described by Moft, the Snap Tablet Stand is a minimal iPad stand that gets out of the way when needed. We like that it folds into a flat piece that can be tucked into a tablet sleeve in a backpack.

The stand is sturdy enough to use the iPad in multiple orientations. Touching the display, drawing, or even playing rhythm games wouldn't dislodge this magnetic stand.

Due to having only two fixed positions, the stand doesn't wobble in use. We could easily visualize someone keeping this stand tucked into a kitchen drawer or desk for quick access to a tablet stand useful for the whole family.

The Snap Tablet Stand is available in blue, gray, black, orange, and pink. Get it for $39.99 on the Moft website or on Amazon.

The Moft Snap Float Stand is a variable height stand that can be maneuvered into various positions thanks to its two-hinge design. Fold the Float Stand shut into a compact device that can fit in a pocket or bag without issue.

Since the stand is compact, it can be used with any iPad using the magnetic case or sticker, even the iPad mini. It attaches in landscape orientation but can be used with the iPad in portrait as a basic stand too.

The primary mode leaves the tablet floating above the table. It can be adjusted to clear about 3 inches above the surface, which is also affected by the iPad size.

Close the top hinge to turn the Float Stand into a clamshell kickstand. This mode is useful for drawing with the Apple Pencil.

The Moft Snap Float Stand is a little more interactive in its use case when compared to the other Moft stands. The hinges require two hands to position correctly, and we definitely recommend taking the iPad off the stand whenever positioning it.

Unlike the Snap Tablet Stand, this feels like you need to be more precise in placing the iPad. When used to float the tablet above the table, it feels like you can slide the magnet around on the heavy 12.9-inch iPad.

Position the magnet wrong, and the iPad will slide down or topple the float stand. This isn't too much of an issue if you're paying attention, but it could lead to an iPad falling over if too complacent.

We like that it can fold into a small device when not in use, like Moft's other accessories — it just gets out of the way.

The variation in angles and positions offered by the Float Stand makes this a great desktop companion. We found ourselves picking up and moving the iPad around the desk more with this simple stand versus when using a heavy-duty magnetic stand from Lululook.

The only significant negative for the Float Stand is its sturdiness. An iPad used while floating above the desk will shake and wobble constantly when touched or tapped. This stand is more useful when the iPad isn't being touched.

Get the Moft Snap Float Stand for $49.90 on the Moft Website. It is also available for $49.99 on Amazon.

The Moft Wall Stand is an adhesive magnetic wall mount for iPads and other devices. It has a reusable adhesive sticker that can be removed and reattached about 30 times.

When in the flat position against the wall, users can attach their iPad using the Tablet Sticker or Snap Case. It will hold devices up to 2.8 pounds, so even the 12.9-inch iPad Pro can magnetically attach without issue.

The Wall Stand isn't just a magnetic attaching point, however, since it has a hidden magnetic shelf built into the stand. Fold the shelf down, and any device weighing less than 2.8 pounds can sit freely on the stand.

Moft's Wall Stand is one of our favorite accessories from this lineup. It is an elegant and simple way to add a universal tablet mount anywhere in the home.

The magnetic part of this stand feels more precarious than it should. Like with the Float Stand, the magnets don't feel like they get an exact grip. Instead, the iPad kind of slides until it locks in place.

We had one scare where the iPad slipped right out of the Wall Stand while using the Snap Case. This was entirely our fault due to how we placed the tablet, but the magnets should line up more precisely than they do.

Fret not, because this clever wall stand has a built-in shelf. Folding down the shelf lets any iPhone, iPad, or device sit simply against the stand — no magnets required.

Now, this does mean the device is perched on a small wall shelf held up with adhesive, but responsible use will prevent any accidents.

We like the Wall Stand so much that we're considering ordering one or two more to place around the home. Even if we stop using Moft's Snap Case, they still act as handy stands, so it solves an interesting problem.

Buy the Moft Wall Stand for $19.99 on Amazon or the Moft website. It is available in white or black.

The Moft Snap System is an accessory ecosystem, so users get more benefits when they own more than one component. Compared to other device ecosystems, the key to this system is that committing to Moft's ecosystem doesn't mean excluding others.

We like that the Snap Case is compatible with the Magic Keyboard and other products that use the iPad's rear magnets. For example, the Lululook magnetic stand works fine with the attached Snap Case.

To exemplify the system's usefulness, we committed to using them alongside our other iPad accessories. Going from the Float case on our desk to the Wall Stand in the kitchen, then the Snap Tablet Stand in the living room was seamless and satisfying.

For a combined total of $169.87, the Moft Snap System isn't cheap. However, that's not too outlandish, considering it comes with two portable stands, a wall stand, and an iPad case.

What is the thickness of the case? Specifically one for an iPP11 with MK. It needs to be thin enough to comfortably close the MK case.

tht said: What is the thickness of the case? Specifically one for an iPP11 with MK. It needs to be thin enough to comfortably close the MK case. This looks almost identical to my CoverBuddy made by SwitchEasy for my iPP12.9 with MK. It closes just fine using the CoverBuddy. These things are expensive for what you get — thin plastic that is easily damaged. They provide what I’d call minimal protection for the iPad. 

This looks almost identical to my CoverBuddy made by SwitchEasy for my iPP12.9 with MK. It closes just fine using the CoverBuddy. These things are expensive for what you get — thin plastic that is easily damaged. They provide what I’d call minimal protection for the iPad. 

regurgitatedcoprolite said: tht said: What is the thickness of the case? Specifically one for an iPP11 with MK. It needs to be thin enough to comfortably close the MK case. This looks almost identical to my CoverBuddy made by SwitchEasy for my iPP12.9 with MK. It closes just fine using the CoverBuddy. These things are expensive for what you get — thin plastic that is easily damaged. They provide what I’d call minimal protection for the iPad.  Yes, for a moment I was thinking whether this company bought CoverBuddy. ;) My daughter had a couple CoverBuddy's for her iPP11. They both broke. She's been using it bare with the MK for awhile now. Will leave it like that as she seems to be doing fine with handling it. I'm still looking for a mythical back only "cover". Magnetically latches on. Thick enough so that the camera bump is flush. Has a Smart Connector bridge for the MK, assuming there is enough slop for the MK to close, but probably not. I'm going sleeve all the way, with software keyboard and all. So a thickish back cover would be interesting to me.

Yes, for a moment I was thinking whether this company bought CoverBuddy. ;) My daughter had a couple CoverBuddy's for her iPP11. They both broke. She's been using it bare with the MK for awhile now. Will leave it like that as she seems to be doing fine with handling it. I'm still looking for a mythical back only "cover". Magnetically latches on. Thick enough so that the camera bump is flush. Has a Smart Connector bridge for the MK, assuming there is enough slop for the MK to close, but probably not. I'm going sleeve all the way, with software keyboard and all. So a thickish back cover would be interesting to me.

Belkin's newest GaN charger , the BOOSTCHARGE PRO, offers USB-C Power Delivery 3.0 that can charge an iPhone 13 from zero to 50% in 20 minutes.

Apple's programming language Swift got a wide array of updates at WWDC 2022. Here's a roundup of the best features that are coming alongside iOS 16 and macOS Ventura very soon.

The hottest conditions in China for more than 60 years caused authorities to close down factories to conserve electricity, but now Foxconn has been able to resume iPad production.

MSI's Creator Z17 notebook is billed as a productivity workhorse with a sleek design. On paper, it's even capable of taking on Apple's creative powerhouse, the 16-inch MacBook Pro. Here's how they compare.

The iPad Pro and the MacBook Air are powerful and reasonably-priced ways to work. Here's what to consider when trying to choose one over the other.

We have both M2 Macs here in our testing studio. We're comparing the M2 MacBook Air against the M2 MacBook Pro to see how they stack up and how much of a difference the thermal limitations make.

Master & Dynamic's MW75 are high-quality headphones offering ANC features, directly competing against Apple's AirPods Max. Here's how the premium personal audio accessories compare.

The new Surface Laptop Go 2 is a thin and light Windows notebook at a low cost, and has been positioned by Microsoft to be a competitor to Apple's latest M2 MacBook Air. Here's how the ultra-portable notebooks compare.

Apple privacy exec Jane Horvath departing for law firm

Samsung Labor Day Sale: up to $1,500 off TVs & Bespoke refrigerators, plus free Galaxy Fold credit

Xcode Cloud subscriptions now available for developers

Belkin's Boost Charge Pro charges an iPhone 13 to half in 20 minutes

Leaker claims to have hands-on iPhone 14 details from developers

Paid Apple Podcast subscriptions grow by 300% in a year

California passes bill that requires online 'guardrails' to protect children

Last call: save $300 on Apple's M1 Max MacBook Pro 16-inch with 64GB RAM

Belkin's newest GaN charger , the BOOSTCHARGE PRO, offers USB-C Power Delivery 3.0 that can charge an iPhone 13 from zero to 50% in 20 minutes.

Apple's programming language Swift got a wide array of updates at WWDC 2022. Here's a roundup of the best features that are coming alongside iOS 16 and macOS Ventura very soon.

The hottest conditions in China for more than 60 years caused authorities to close down factories to conserve electricity, but now Foxconn has been able to resume iPad production.

Almost as important as the Apple Watch itself, is the band that you choose to express yourself. Here are our picks for bands and straps to pair with Apple's wearable device.

The Nikon Z 30 is the camera maker's most affordable mirrorless shooter yet, and it's designed with social media and video creators in mind.

Bring gaming on your iPhone or Apple TV closer to the console experience, by using one of these game controllers with your Apple devices.

The iPhone 14 and iPhone 14 Max are expected to be announced during Apple's September 7 event. Here's what we know about the new models, and what we expect that they will look like.

Apple will announce the iPhone 14 Pro lineup during an event on September 7. Here's what the rumor mill has to say, and what we think it looks like.

Keep tabs on the air quality of your home — including potentially deadly radon levels — with the Airthings View Plus.

Apple didn't make a Magic Keyboard for iPad mini 6, and Lululook's Magnetic Keyboard perhaps acts as a testament to why.

As a recent addition to the Serena Shades by Lutron lineup, the new architectural honeycomb shades are an essential part of any HomeKit smart home.

Casetify's new "Toy Story" collection is full of nostalgia for Pixar fans with cases, watch bands, batteries, and more. We took a look at a few of the new case designs for iPhone 13 Pro.

The Das Keyboard MacTigr is a full-sized mechanical keyboard for Mac with a minimalist design and no flashy features.

AppleInsider is one of the few truly independent online publications left. If you love what we do, please consider a small donation to help us keep the lights on.

If you love AppleInsider and want to support independent publications, please consider a small donation.